Starlink Installation Sydney — done right
Professional Starlink installation by a licensed, ACMA-registered cabler — proper mounts, concealed cabling and verified speeds. Not sure Starlink is even your best option? We'll tell you straight, then install whatever wins.
Birch Tech installs Starlink across Sydney & NSW from $199 for a standard single-storey mount, around $349 for tile/two-storey or longer cable runs, and from $549 for elevated/pole or remote-NSW jobs with mesh and failover — every job quoted free first. We're a licensed, ACMA-registered cabler and give independent advice on Starlink vs NBN vs 4G/5G before you spend a cent. Call 1300 287 256.
More than bolting a dish to the roof
Registered-cabler work
Fixed cabling must be done by an ACMA-registered cabler. We are — DIY isn't.
Heights done safely
Roof and pole mounts handled by insured techs with working-at-heights procedures.
Weatherproofed properly
Correct mount, sealing and cable entry so it survives Sydney weather for years.
Optimised placement
We find the clearest sky view and best router spot, then verify real speeds.
Starlink install pricing
Indicative starting prices — every job is quoted free after a quick assessment, so you know the cost before we start.
Connection Health Check
$99 standalone — credited back if you proceed
- Address-led coverage check (Starlink / NBN-FTTx / 4G-5G / Fixed Wireless)
- Vendor-neutral written recommendation for your address
- On-site or remote speed & obstruction assessment
- Quote for any install required
Starlink Install — Standard
Single-storey standard mount
- Single-storey roof or ground mount
- Supplied-and-fitted mount + weatherproofing
- Cable run to router location (registered-cabler work)
- Router placement, Wi-Fi setup + speed test
- Workmanship warranty
Starlink Install — Complex
Tile roof, two-storey or long cable run
- Tile roof, two-storey or obstruction management
- Pole / non-penetrating mount options
- Cable concealment + surge protection
- Whole-area Wi-Fi check + handover
- Working-at-heights handled, fully insured
Whole-Property Connectivity
Elevated / remote-NSW + mesh + failover
- Elevated pole/heights or remote-NSW install
- Wi-Fi mesh across home + sheds/granny flat
- Starlink + 4G/5G failover option so you rarely drop offline
- Plan-broker concierge: order, activation, address check
- Setup of your preferred connection (independent advice)
Indicative starting prices — every job is quoted free after a quick assessment. Final price depends on roof type, mount, cable run and access.
Starlink isn't always the answer — we'll tell you
We're installers first and brokers second. Before you spend a cent we check what's actually available at your address and recommend the best connection — even if that's not Starlink.
Starlink (satellite)
Rural, regional & poor-NBN areas; fast backup link
NBN / FTTx (fixed-line)
Most metro/suburban homes & business — best value & stability
4G / 5G home internet
Renters & strong-5G metro homes; quick, movable setup
NBN Fixed Wireless
Regional homes with line-of-sight to an NBN tower
Where the NBN runs out and mobile coverage drops, Starlink keeps acreages, farms and sheds online — installed properly, weatherproofed and verified.
Starlink Installation — FAQs
Are you an authorised Starlink reseller?
No — and we'll always be upfront about that. Birch Tech is an independent, licensed installer. You buy the Starlink hardware and plan directly from Starlink; we professionally install, configure and support it. We're not affiliated with or endorsed by SpaceX/Starlink.
Do I buy the Starlink kit, or do you supply it?
You order the kit and plan directly from Starlink (some hardware is rental and must be returned if you cancel). We handle everything else — mounting, cabling, weatherproofing, router placement and Wi-Fi. If you'd like, we can guide you through ordering at the right address.
How much does a Starlink installation cost in Sydney?
Our installs start from $199 for a standard single-storey mount, around $349 for tile/two-storey or longer cable runs, and from $549 for elevated/pole or remote-NSW jobs with mesh and failover. Every job is quoted free first — final price depends on roof type, mount and cable run.
How long does the install take?
Most standard residential installs are completed in a few hours. Complex roofs, long cable runs, pole mounts or whole-property Wi-Fi take longer — we'll confirm a time when we quote.
Is Starlink the best option for me, or should I get NBN?
It depends on your address. If you have good NBN/FTTx, that's often cheaper and faster; if you're rural, have poor NBN, or need to connect a shed or farm, Starlink is hard to beat. We give you a straight, vendor-neutral recommendation before you spend anything.
Can you add Wi-Fi mesh or connect a shed/granny flat?
Yes. We do whole-property Wi-Fi mesh and point-to-point links to sheds, studios and granny flats, plus Starlink + 4G/5G failover so you're never offline.
Do you service rural and regional NSW?
Yes — rural and acreage Starlink installs are a core part of what we do, alongside metro Sydney. Remote jobs are quoted with travel included.
What warranty do I get?
We provide a workmanship warranty on our installation. The Starlink hardware itself is covered by Starlink's own warranty terms.
How we make money: Birch Tech is a licensed installer. We also help you choose and connect internet plans and recommend home-tech products (such as security cameras and smart-home devices) — and where we refer you to a provider or retailer, we may receive a referral fee or commission, at no extra cost to you. We work with a limited panel of partners, so this is not a whole-of-market comparison and we don't cover every provider or product. Any recommendation we make may be influenced by these arrangements, not solely by price or suitability, so we always recommend confirming current prices and terms directly with the provider or retailer before you buy.
Starlink and SpaceX are trademarks of Space Exploration Technologies Corp. Birch Tech is an independent installer and referrer and is not affiliated with, authorised by, sponsored by, or endorsed by SpaceX or Starlink. We install and configure Starlink hardware; we are not an authorised Starlink reseller.
Starlink Installation by Area
Based in Padstow and servicing all of Sydney & NSW — metro and regional. Find your area below or call 1300 287 256 for fast, often same-day service.
Book Your Starlink Install
Speak to a friendly Birch Tech expert. We provide free quotes with no hard sell — call us or send a message and we'll get back to you fast.